U.S. Code · Título 15
Product certification and labeling
15 U.S.C. § 2063
Office of the Law Revision Counsel · release 119-142
Se muestra el texto operativo de la sección. Las notas estatutarias y el historial de enmiendas están en la fuente oficial.
Certification accompanying product; products with more than one manufacturer
General conformity certification.—
Except as provided in paragraphs (2) and (3), every manufacturer of a product which is subject to a consumer product safety rule under this chapter or similar rule, ban, standard, or regulation under any other Act enforced by the Commission and which is imported for consumption or warehousing or distributed in commerce (and the private labeler of such product if such product bears a private label) shall issue a certificate which—
Third party testing requirement.—
Effective on the dates provided in paragraph (3), before importing for consumption or warehousing or distributing in commerce any children’s product that is subject to a children’s product safety rule, every manufacturer of such children’s product (and the private labeler of such children’s product if such children’s product bears a private label) shall—
Schedule for implementation of third party testing.—
General application.—
Except as provided under subparagraph (F), the requirements of paragraph (2) shall apply to any children’s product manufactured more than 90 days after the Commission has established and published notice of the requirements for accreditation of third party conformity assessment bodies to assess conformity with a children’s product safety rule to which such children’s product is subject.Time line for accreditation.—
Lead paint.—
Not later than 30 days after August 14, 2008, the Commission shall publish notice of the requirements for accreditation of third party conformity assessment bodies to assess conformity with part 1303 of title 16, Code of Federal Regulations.Full-size cribs; non full-size cribs; pacifiers.—
Not later than 60 days after August 14, 2008, the Commission shall publish notice of the requirements for accreditation of third party conformity assessment bodies to assess conformity with parts 1508, 1509, and 1511 of such title.Small parts.—
Not later than 90 days after August 14, 2008, the Commission shall publish notice of the requirements for accreditation of third party conformity assessment bodies to assess conformity with part 1501 of such title.Children’s metal jewelry.—
Not later than 120 days after August 14, 2008, the Commission shall publish notice of the requirements for accreditation of third party conformity assessment bodies to assess conformity with the requirements of section 1278a(a)(2) of this title with respect to children’s metal jewelry.Baby bouncers, walkers, and jumpers.—
Not later than 210 days after August 14, 2008, the Commission shall publish notice of the requirements for accreditation of third party conformity assessment bodies to assess conformity with parts 1500.18(a)(6) and 1500.86(a) of such title.1All other children’s product safety rules.—
The Commission shall publish notice of the requirements for accreditation of third party conformity assessment bodies to assess conformity with other children’s product safety rules at the earliest practicable date, but in no case later than 10 months after August 14, 2008, or, in the case of children’s product safety rules established or revised 1 year or more after such date, not later than 90 days before such rules or revisions take effect.Accreditation.—
Accreditation of third party conformity assessment bodies pursuant to the requirements established under subparagraph (B) may be conducted either by the Commission or by an independent accreditation organization designated by the Commission.Periodic review.—
The Commission shall periodically review and revise the accreditation requirements established under subparagraph (B) to ensure that the requirements assure the highest conformity assessment body quality that is feasible.Publication of accredited entities.—
The Commission shall maintain on its Internet website an up-to-date list of entities that have been accredited to assess conformity with children’s product safety rules in accordance with the requirements published by the Commission under this paragraph.Extension.—
If the Commission determines that an insufficient number of third party conformity assessment bodies have been accredited to permit certification for a children’s product safety rule under the accelerated schedule required by this paragraph, the Commission may extend the deadline for certification to such rule by not more than 60 days.Rulemaking.—
Until the date that is 3 years after August 14, 2008, Commission proceedings under this paragraph shall be exempt from the requirements of sections 553 and 601 through 612 of title 5.Effective 1 year after August 14, 2008, the manufacturer of a children’s product shall place permanent, distinguishing marks on the product and its packaging, to the extent practicable, that will enable—
Rules to establish reasonable testing programs
The Commission may by rule prescribe reasonable testing programs for any product which is subject to a consumer product safety rule under this chapter, or a similar rule, regulation, standard, or ban under any other Act enforced by the Commission, and for which a certificate is required under subsection (a). Any test or testing program on the basis of which a certificate is issued under subsection (a) may, at the option of the person required to certify the product, be conducted by an independent third party qualified to perform such tests, unless the Commission, by rule, requires testing by an independent third party for a particular rule, regulation, standard, or ban, or for a particular class of products.
Form and contents of labels
The Commission may by rule require the use and prescribe the form and content of labels which contain the following information (or that portion of it specified in the rule)—
Additional regulations for third party testing
Audit
Not later than 10 months after August 14, 2008, the Commission shall by regulation establish requirements for the periodic audit of third party conformity assessment bodies as a condition for the continuing accreditation of such conformity assessment bodies under subsection (a)(3)(C).
Compliance; continuing testing
Not later than 15 months after August 14, 2008, the Commission shall by regulation—
establish protocols and standards—
Reducing third party testing burdens
Assessment
Not later than 60 days after August 12, 2011, the Commission shall seek public comment on opportunities to reduce the cost of third party testing requirements consistent with assuring compliance with any applicable consumer product safety rule, ban, standard, or regulation. The request for public comment shall include the following:
Regulations
Following the public comment period described in subparagraph (A), but not later than 1 year after August 12, 2011, the Commission shall review the public comments and may prescribe new or revised third party testing regulations if it determines that such regulations will reduce third party testing costs consistent with assuring compliance with the applicable consumer product safety rules, bans, standards, and regulations.
Report
If the Commission determines that it lacks authority to implement an opportunity for reducing the costs of third-party testing consistent with assuring compliance with the applicable consumer product safety rules, bans, standards, and regulations, it shall transmit a report to Congress reviewing those opportunities, along with any recommendations for any legislation to permit such implementation.
Special rules for small batch manufacturers
Special consideration; exemption
Consideration; alternative requirements
Subject to subparagraph (C), in implementing third party testing requirements under this section, the Commission shall take into consideration any economic, administrative, or other limits on the ability of small batch manufacturers to comply with such requirements and shall, after notice and a hearing, provide alternative testing requirements for covered products manufactured by small batch manufacturers in lieu of those required under subsection (a) or (b). Any such alternative requirements shall provide for reasonable methods to assure compliance with any applicable consumer product safety rule, ban, standard, or regulation. The Commission may allow such alternative testing requirements for small batch manufacturers with respect to a specific product or product class or with respect to a specific safety rule, ban, standard, or regulation, or portion thereof.
Exemption
If the Commission determines that no alternative testing requirement is available or economically practicable, it shall exempt small batch manufacturers from third party testing requirements under subsections (a) and (b).
Certification
In lieu of or as part of any alternative testing requirements provided under clause (i), the Commission may allow certification of a product to an applicable consumer product safety rule, ban, standard, or regulation, or portion thereof, based on documentation that the product complies with another national or international governmental standard or safety requirement that the Commission determines is the same or more stringent than the consumer product safety rule, ban, standard, or regulation, or portion thereof. Any such certification shall only be allowed to the extent of the equivalency with a consumer product safety rule, ban, standard, or regulation and not to any other part of the consumer product safety rule, ban, standard, or regulation.
Restriction
Except as provided in subparagraph (C), and except where the Commission determines that the manufacturer does not meet the definition of a small batch manufacturer, for any small batch manufacturer registered pursuant to subparagraph (B), the Commission may not require third party testing of a covered product by a third party conformity assessment body until the Commission has provided either an alternative testing requirement or an exemption in accordance with clause (i) or (ii), respectively.
Registration
Any small batch manufacturer that utilizes alternative requirements or an exemption under this paragraph shall register with the Commission prior to using such alternative requirements or exemptions pursuant to any guidelines issued by the Commission to carry out this requirement.
Limitation
The Commission shall not provide or permit to continue in effect any alternative requirements or exemption from third party testing requirements under this paragraph where it determines, based on notice and a hearing, that full compliance with subsection (a) or (b) is reasonably necessary to protect public health or safety. The Commission shall not provide any alternative requirements or exemption for—
Subsequent manufacturer
Nothing in this paragraph shall be construed to affect third party testing or any other requirements with respect to a subsequent manufacturer or other entity that uses components provided by one or more small batch manufacturers.
Definitions
For purposes of this paragraph—
Exclusion from third party testing
Certain printed materials
In general
The third party testing requirements established under subsection (a) shall not apply to ordinary books or ordinary paper-based printed materials.
Definitions
Ordinary book
The term “ordinary book” means a book printed on paper or cardboard, printed with inks or toners, and bound and finished using a conventional method, and that is intended to be read or has educational value. Such term does not include books with inherent play value, books designed or intended for a child 3 years of age or younger, and does not include any toy or other article that is not a book that is sold or packaged with an ordinary book.
Ordinary paper-based printed materials
The term “ordinary paper-based printed materials” means materials printed on paper or cardboard, such as magazines, posters, greeting cards, and similar products, that are printed with inks or toners and bound and finished using a conventional method.
Exclusions
Such terms do not include books or printed materials that contain components that are printed on material other than paper or cardboard or contain nonpaper-based components such as metal or plastic parts or accessories that are not part of the binding and finishing materials used in a conventional method.
Metal component parts of bicycles
The third party testing requirements established under subsection (a) shall not apply to metal component parts of bicycles with respect to compliance with the lead content limits in place pursuant to section 1278a(b)(6) of this title.
Withdrawal of accreditation
In general
The Commission may withdraw its accreditation or its acceptance of the accreditation of a third party conformity assessment body accredited under this section if the Commission finds, after notice and investigation, that—
Procedure
In any proceeding to withdraw the accreditation of a conformity assessment body, the Commission—
shall consider the gravity of the conformity assessment body’s action or failure to act, including—
may—
Failure to cooperate
The Commission may suspend the accreditation of a conformity assessment body if it fails to cooperate with the Commission in an investigation under this section.
Definitions
In this section:
Children’s product safety rule
The term “children’s product safety rule” means a consumer product safety rule under this chapter or similar rule, regulation, standard, or ban under any other Act enforced by the Commission, including a rule declaring a consumer product to be a banned hazardous product or substance.
Third party conformity assessment body
In general
The term “third party conformity assessment body” means a conformity assessment body that, except as provided in subparagraph (D), is not owned, managed, or controlled by the manufacturer or private labeler of a product assessed by such conformity assessment body.
Governmental participation
Such term may include an entity that is owned or controlled in whole or in part by a government if—
Testing and certification of art materials and products
A certifying organization (as defined in appendix A to section 1500.14(b)(8) of title 16, Code of Federal Regulations (or any successor regulation or ruling)) meets the requirements of subparagraph (A) with respect to the certification of art material and art products required under this section or by regulations prescribed under the Federal Hazardous Substances Act (15 U.S.C. 1261 et seq.).
Firewalled conformity assessment bodies
Upon request, the Commission may accredit a conformity assessment body that is owned, managed, or controlled by a manufacturer or private labeler as a third party conformity assessment body if the Commission by order finds that—
the conformity assessment body has established procedures to ensure that—
Requirements for certificates
Identification of issuer and conformity assessment body
Every certificate required under this section shall identify the manufacturer or private labeler issuing the certificate and any third party conformity assessment body on whose testing the certificate depends. The certificate shall include, at a minimum, the date and place of manufacture, the date and place where the product was tested, each party’s name, full mailing address, telephone number, and contact information for the individual responsible for maintaining records of test results.
English language
Every certificate required under this section shall be legible and all content required by this section shall be in the English language. A certificate may also contain the same content in any other language.
Availability of certificates
Every certificate required under this section shall accompany the applicable product or shipment of products covered by the same certificate and a copy of the certificate shall be furnished to each distributor or retailer of the product. Upon request, the manufacturer or private labeler issuing the certificate shall furnish a copy of the certificate to the Commission.
Electronic filing of certificates for imported products
In consultation with the Commissioner of U.S. Customs and Border Protection, the Commission may, by rule, provide for the electronic filing of certificates under this section up to 24 hours before arrival of an imported product. Upon request, the manufacturer or private labeler issuing the certificate shall furnish a copy to the Commission and to the Commissioner of U.S. Customs and Border Protection.
Rule of construction
Compliance of any children’s product with third party testing and certification or general conformity certification requirements under this section shall not be construed to exempt such children’s product from any requirement that such product actually be in conformity with all applicable rules, regulation, standards, or ban under any Act enforced by the Commission.
Requirement for advertisements
No advertisement for a consumer product or label or packaging of such product may contain a reference to a consumer product safety rule or a voluntary consumer product safety standard unless such product conforms with the applicable safety requirements of such rule or standard.
(Pub. L. 92–573, § 14, Oct. 27, 1972, 86 Stat. 1220; Pub. L. 110–314, title I, §§ 102(a)(1)(A), (2), (3), (b), (d), 103, Aug. 14, 2008, 122 Stat. 3022, 3024, 3027, 3028; Pub. L. 112–28, §§ 2(a), 6, 10(a), Aug. 12, 2011, 125 Stat. 276, 281, 283; Pub. L. 114–125, title VIII, § 802(d)(2), Feb. 24, 2016, 130 Stat. 210.)