U.S. Code · Título 15
Manufacturing USA
15 U.S.C. § 278s
Office of the Law Revision Counsel · release 119-142
Se muestra el texto operativo de la sección. Las notas estatutarias y el historial de enmiendas están en la fuente oficial.
Definitions
In this section:
Agency head
The term “agency head” means the head of any Executive agency (as defined in section 105 of title 5), other than the Department of Defense.
Regional innovation initiative
The term “regional innovation initiative” has the meaning given such term in section 3722(f)(1) of this title.
Establishment of Manufacturing USA Program
In general
The Secretary shall establish within the Institute a program to be known as the “Manufacturing United States of America Program” or the “Manufacturing USA Program” (referred to in this section as the “Program”).
Purposes of Program
The purposes of the Program are—
Support
The Secretary, acting through the Director, shall carry out the purposes set forth in paragraph (2) by supporting—
Director
The Secretary shall carry out the Program through the Director.
Establishment of Manufacturing USA Network
In general
As part of the Program, the Secretary shall establish a network of Manufacturing USA institutes.
Designation
The network established under paragraph (1) shall be known as the “Manufacturing United States of America Network” or the “Manufacturing USA Network” (referred to in this section as the “Network”).
Manufacturing USA institutes
In general
For purposes of this section, a Manufacturing USA institute is an institute that—
has the potential—
Activities
Required activities
For purposes of this section, a Manufacturing USA institute is also an institute that carries out the following:
Permissible activities
In addition to the activities set forth under subparagraph (A), a Manufacturing USA institute may carry out such other activities as may be consistent with the purposes set forth under subsection (b)(2).
Additional Manufacturing USA institutes
In general
Except as provided in subparagraph (C), the National Additive Manufacturing Innovation Institute and other manufacturing institutes formally recognized as Manufacturing USA institutes pursuant to Federal law or executive actions, or under pending interagency review for such recognition as of December 16, 2014, shall be considered Manufacturing USA institutes for purposes of this section.
Network participation
Except as provided in subparagraph (C), an institute that is substantially similar to an institute described by paragraphs (1) and (2) but does not meet every element of such description and does not receive financial assistance under subsection (e) may, upon request of the institute, be recognized as a Manufacturing USA institute by the Secretary for purposes of participation in the Network.
Applicability
Effective beginning on December 20, 2019, an institute shall be treated as a Manufacturing USA institute under this section and subject to subsections (b)(2), (d), and (e) in the same manner and to the same extent as such provisions apply to a Manufacturing USA institute described by paragraphs (1) and (2) if such institute—
Financial assistance to establish and support Manufacturing USA institutes
Financial assistance authorized
Under the Program, the Secretary and the Secretary of Energy shall, and every other agency head may, award financial assistance to a person or group of persons to assist the person or group of persons in planning, establishing, or supporting a Manufacturing USA institute.
Period and renewal of awards
Initial periods
An award of financial assistance under paragraph (1) shall be awarded for an initial period of not less than 5 years and not more than 7 years.
Renewal of awards
Renewal authorized
An award of financial assistance under paragraph (1) may be renewed for additional periods, with each period not to exceed the duration of the initial period of the award, subject to a rigorous merit review.
Consideration of performance standards
In carrying out a rigorous merit review under clause (i) for renewal of an award under such clause for a Manufacturing USA institute, an agency head shall consider the extent to which the institute has made progress in meeting the standards of performance established pursuant to paragraph (5)(C).
Initial failure to meet performance standards
If, pursuant to a rigorous merit review under clause (i) for renewal of an award under such clause for a Manufacturing USA institute, an agency head finds that the institute does not meet the standards for performance established pursuant to paragraph (5)(C), the agency head shall—
Further failure to meet performance standards
If a Manufacturing USA institute fails to remedy a deficiency identified or to show significant improvement in performance during the 1-year period set forth under clause (iii)(II)—
Continuation of existing Manufacturing USA institutes
Not withstanding clauses (i) through (iv), a Manufacturing USA institute already in existence or undergoing a renewal process prior to December 1, 2019—
Application for financial assistance
In general
A person or group of persons seeking financial assistance under paragraph (1) shall submit to an agency head an application therefor at such time, in such manner, and containing such information as the agency head may require.
Requirements
An application submitted under subparagraph (A) for an institute shall, at a minimum include the following:
Selection
Competitive, merit review
In awarding financial assistance under paragraph (1), an agency head shall—
Participation in process
Prohibition on participation by political appointees
The review required by subparagraph (A)(i) may not include a review by a group of individuals that includes a political appointee.
Conflict of interest policies
Each agency head shall implement a conflict of interest policy that—
Definition of political appointee
For purposes of this subparagraph, the term “political appointee” has the meaning given such term in section 714(h) of title 38.
Considerations
In selecting a person or group of persons who submitted an application to an agency head under paragraph (3) for an award of financial assistance under paragraph (1) for a Manufacturing USA institute, the agency head shall consider, at a minimum, the following:
Performance measurement, transparency, and accountability
For each award of financial assistance under paragraph (1) by an agency head, the agency head shall—
Collaboration
In awarding financial assistance under paragraph (1), an agency head, in coordination with the National Program Office, as the agency head considers appropriate, may collaborate with Federal departments and agencies whose missions contribute to or are affected by advanced manufacturing, including, as the agency head considers appropriate, the Department of Agriculture, the Department of Defense, the Department of Education, the Department of Energy, the Department of Labor, the Food and Drug Administration, the National Aeronautics and Space Administration, the National Institutes of Health, and the National Science Foundation.
Matching funds and preferences
In general
Except as provided in subparagraph (B), an agency head may not, with respect to a Manufacturing USA institute, award financial assistance under paragraph (1) or renew an award of financial assistance under paragraph (2) unless the agency head determines that non-Federal funding comprises 50 percent or more of the total amount of funding made available for the operation and support of the institute.
Waivers
An agency head awarding financial assistance under paragraph (1) with respect to a Manufacturing USA institute may waive the requirements of subparagraph (A) in the case of satellite centers, large capital facilities, equipment purchases, workforce development, or general operations.
Diversity preferences
In awarding financial assistance under paragraph (1) for planning or establishing a Manufacturing USA institute, an agency head shall give special consideration to Manufacturing USA institutes that—
Authority to award financial assistance for construction of test beds and specialized facilities
In general
The Secretary may, acting through the Director, award financial assistance for the construction of test beds and specialized facilities by Manufacturing USA institutes established or supported under subsection (e) as the Secretary considers appropriate to carry out the purposes of the Program.
Requirements
The Secretary shall exercise authority under paragraph (1) in a manner and with requirements consistent with paragraphs (3) through (8) of subsection (e).
Priority
The Secretary shall establish preferences in selection criteria for proposals for financial assistance under this subsection from Manufacturing USA institutes that integrate as active members one or more covered entities as described in section 18971 of title 42.
Grant program for public service activities for Manufacturing USA institutes without Federal funding
The Secretary may award a grant on a competitive basis to a Manufacturing USA institute that is not receiving financial assistance under subsection (e) to carry out workforce development, outreach to small- and medium-sized manufacturers, and other activities that—
Authorization of appropriations
NIST Industrial Technical Services account
To the extent provided for in advance by appropriations Acts, the Secretary may use amounts appropriated to the Industrial Technical Services account to carry out this section as follows:
Department of Energy
There are authorized to be appropriated to the Secretary of Energy for the provision of financial assistance under subsection (e) by the Department of Energy amounts as follows:
National Program Office
Establishment
The Secretary shall establish, within the Institute, the National Office of the Manufacturing USA Network (referred to in this section as the “National Program Office”), which shall oversee and carry out the Program.
Functions
The functions of the National Program Office are—
Recommendations
In developing the strategic plan under subparagraph (C) of paragraph (2) and updating such plan under subparagraph (D) of such paragraph, the Secretary shall solicit recommendations and advice from a wide range of stakeholders, including industry, small and medium-sized manufacturing enterprises, research universities, community colleges, State, Tribal, and local governments, and other relevant organizations and institutions on an ongoing basis.
Report to Congress
Upon completion, the Secretary shall transmit the strategic plan required under paragraph (2)(C) to the Committee on Commerce, Science, and Transportation of the Senate and the Committee on Science, Space, and Technology of the House of Representatives. Upon completion of each update required under paragraph (2)(D), the Secretary shall transmit such strategic plan to such committees.
Hollings Manufacturing Extension Partnership
In general
The Secretary shall ensure that the National Program Office leverages the capabilities of the Hollings Manufacturing Extension Partnership into Program planning to ensure—
Liaisons
The Secretary may provide financial assistance to a manufacturing extension center established as part of the Hollings Manufacturing Extension Partnership to support the purposes of the Program by providing services in one or more of the following areas:
Detailees
Any Federal Government employee may be detailed to the National Program Office without reimbursement. Such detail shall be without interruption or loss of civil service status or privilege.
Council for coordination of institutes
Council
The National Program Office shall establish or designate a council of heads of any Manufacturing USA institute receiving Federal funding at any time to foster collaboration between Manufacturing USA institutes.
Meetings
The council established or designated pursuant to subparagraph (A) shall meet not less frequently than twice each year.
Duties of the council
The council established pursuant to subparagraph (A) shall assist the National Program Office in carrying out the functions of the National Program Office under paragraph (2).
Reporting and auditing
Annual reports to the Secretary
In general
Not less frequently than once each year, each agency head that is providing financial assistance under subsection (e) shall—
Elements
Each report submitted under subparagraph (A) shall include:
consistent with the standards for performance established under subsection (e)(5)(B), a description of the performance of the Manufacturing USA institute with respect to—
Annual reports to Congress
In general
Not less frequently than once each year until December 31, 2030, the Secretary shall submit a report to Congress that describes the performance of the Program during the most recent 1-year period.
Elements
Each report submitted under subparagraph (A) shall include, for the period covered by the report—
Assessments by Comptroller General of the United States
Assessments
Not less frequently than once every 3 years, the Comptroller General of the United States shall submit to Congress an assessment of the operation of the Program during the most recent 3-year period, including an assessment of the progress made towards achieving the goals specified in the national strategic plan for advanced manufacturing required under section 6622(b)(7) of title 42.
Elements
Each assessment submitted under subparagraph (A) shall include, for the period covered by the report—
Final assessment
No later than December 31, 2030, the Comptroller General shall submit to Congress a final report regarding the overall success of the Program.
Additional authorities
Appointment of personnel and contracts
The Secretary may appoint such personnel and enter into such contracts, financial assistance agreements, and other agreements as the Secretary considers necessary or appropriate to carry out the Program, including support for research and development activities involving a Manufacturing USA institute.
Transfer of funds
Of amounts available under the authority provided by subsection (g), the Secretary may transfer to other Federal agencies such sums as the Secretary considers necessary or appropriate to carry out the Program. No funds so transferred may be used to reimburse or otherwise pay for the costs of financial assistance incurred or commitments of financial assistance made prior to December 16, 2014.
Authority of other agencies
In the event that the Secretary exercises the authority to transfer funds to another agency under paragraph (2), such agency may accept such funds to award and administer, under the same conditions and constraints applicable to the Secretary, all aspects of financial assistance awards under this section.
Use of resources
In furtherance of the purposes of the Program, the Secretary may use, with the consent of a covered entity and with or without reimbursement, the land, services, equipment, personnel, and facilities of such covered entity.
Acceptance of resources
In addition to amounts appropriated to carry out the Program, the Secretary may accept funds, services, equipment, personnel, and facilities from any covered entity to carry out the Program, subject to the same conditions and constraints otherwise applicable to the Secretary under this section and such funds may only be obligated to the extent provided for in advance by appropriations Acts.
Covered entities
For purposes of this subsection, a covered entity is any Federal department, Federal agency, instrumentality of the United States, State, local government, Tribal government, territory, or possession of the United States, or of any political subdivision thereof, or international organization, or any public or private entity or individual.
Collaborations with other agencies
The Secretary shall collaborate with Federal agencies whose missions contribute to, or are affected by, advanced manufacturing to identify and leverage existing resources at such Federal agencies to assist Manufacturing USA institutes in carrying out the purposes of the Program set forth under subsection (b)(2). Such existing resources may include programs—
Patents
Chapter 18 of title 35 shall apply to any funding agreement (as defined in section 201 of that title) awarded to new or existing Manufacturing USA institutes with respect to which financial assistance is awarded under subsection (e).
References to prior names and terminology
Any reference in law, regulation, map, document, paper, or other record of the United States to the “Network for Manufacturing Innovation Program”, the “Network for Manufacturing Innovation”, “National Office of the Network for Manufacturing Innovation Program”, or a “center for manufacturing innovation” shall be considered to be a reference to the Manufacturing USA Program, the Manufacturing USA Network, the National Office of the Manufacturing USA Network, or a Manufacturing USA institute, respectively.
(Mar. 3, 1901, ch. 872, § 34, as added Pub. L. 113–235, div. B, title VII, § 703(2), Dec. 16, 2014, 128 Stat. 2221; amended Pub. L. 116–92, div. A, title XVII, § 1741(a), Dec. 20, 2019, 133 Stat. 1826; Pub. L. 117–167, div. B, title II, §§ 10261, 10263(b)–(d), Aug. 9, 2022, 136 Stat. 1503, 1505, 1506; Pub. L. 117–263, div. E, title LIX, § 5911, Dec. 23, 2022, 136 Stat. 3442; Pub. L. 119–60, div. H, title LXXXVIII, § 8802, Dec. 18, 2025, 139 Stat. 1971.)