U.S. Code · Título 26
Advanced manufacturing production credit
26 U.S.C. § 45X
Office of the Law Revision Counsel · release 119-142
Se muestra el texto operativo de la sección. Las notas estatutarias y el historial de enmiendas están en la fuente oficial.
In general
Allowance of credit
For purposes of section 38, the advanced manufacturing production credit for any taxable year is an amount equal to the sum of the credit amounts determined under subsection (b) with respect to each eligible component which is—
Production and sale must be in trade or business
Any eligible component produced and sold by the taxpayer shall be taken into account only if the production and sale described in paragraph (1) is in a trade or business of the taxpayer.
Unrelated person
In general
For purposes of this subsection, a taxpayer shall be treated as selling components to an unrelated person if such component is sold to such person by a person related to the taxpayer.
Election
In general
At the election of the taxpayer (in such form and manner as the Secretary may prescribe), a sale of components by such taxpayer to a related person shall be deemed to have been made to an unrelated person.
Requirement
As a condition of, and prior to, any election described in clause (i), the Secretary may require such information or registration as the Secretary deems necessary for purposes of preventing duplication, fraud, or any improper or excessive amount determined under paragraph (1).
Credit amount
In general
Subject to paragraph (3), the amount determined under this subsection with respect to any eligible component, including any eligible component it incorporates, shall be equal to—
in the case of a thin film photovoltaic cell or a crystalline photovoltaic cell, an amount equal to the product of—
in the case of a solar module, an amount equal to the product of—
in the case of a wind energy component—
if such component is not described in clause (i), an amount equal to the product of—
in the case of an inverter, an amount equal to the product of—
in the case of a battery cell, an amount equal to the product of—
in the case of a battery module, an amount equal to the product of—
Applicable amounts
Wind energy components
For purposes of paragraph (1)(F)(ii), the applicable amount with respect to any wind energy component shall be—
in the case of an offshore wind foundation—
Inverters
For purposes of paragraph (1)(I), the applicable amount with respect to any inverter shall be—
Phase out and termination
In general
Subject to subparagraphs (C) and (D), in the case of any eligible component sold after December 31, 2029, the amount determined under this subsection with respect to such component shall be equal to the product of—
Phase out percentage
The phase out percentage under this subparagraph is equal to—
Phase out for applicable critical minerals other than metallurgical coal
In general
In the case of any applicable critical mineral (other than metallurgical coal) produced after December 31, 2030, the amount determined under this subsection with respect to such mineral shall be equal to the product of—
Phase out percentage for applicable critical minerals other than metallurgical coal
The phase out percentage under this clause is equal to—
Termination for wind energy components
This section shall not apply to any wind energy component produced and sold after December 31, 2027.
Termination for metallurgical coal
This section shall not apply to any metallurgical coal produced after December 31, 2029.
Limitation on capacity of battery cells and battery modules
In general
For purposes of subparagraph (K)(ii) or (L)(ii) of paragraph (1), the capacity determined under either subparagraph with respect to a battery cell or battery module shall not exceed a capacity-to-power ratio of 100:1.
Capacity-to-power ratio
For purposes of this paragraph, the term “capacity-to-power ratio” means, with respect to a battery cell or battery module, the ratio of the capacity of such cell or module to the maximum discharge amount of such cell or module.
Definitions
For purposes of this section—
Eligible component
In general
The term “eligible component” means—
Application with other credits
The term “eligible component” shall not include any property which is produced at a facility if the basis of any property which is part of such facility is taken into account for purposes of the credit allowed under section 48C after the date of the enactment of this section.
Material assistance from prohibited foreign entities
In the case of taxable years beginning after the date of enactment of this subparagraph, the term “eligible component” shall not include any property which includes any material assistance from a prohibited foreign entity (as defined in section 7701(a)(52), as applied by substituting “used in a product sold before January 1, 2027” for “used in a product sold before January 1, 2030” in subparagraph (D)(iv)(II)(bb) thereof).
Inverters
In general
The term “inverter” means an end product which is suitable to convert direct current electricity from 1 or more solar modules or certified distributed wind energy systems into alternating current electricity.
Central inverter
The term “central inverter” means an inverter which is suitable for large utility-scale systems and has a capacity which is greater than 1,000 kilowatts (expressed on a per alternating current watt basis).
Commercial inverter
The term “commercial inverter” means an inverter which—
Distributed wind inverter
In general
The term “distributed wind inverter” means an inverter which—
Certified distributed wind energy system
The term “certified distributed wind energy system” means a wind energy system which is certified by an accredited certification agency to meet Standard 9.1-2009 of the American Wind Energy Association (including any subsequent revisions to or modifications of such Standard which have been approved by the American National Standards Institute).
Microinverter
The term “microinverter” means an inverter which—
has a rated output of—
Residential inverter
The term “residential inverter” means an inverter which—
Utility inverter
The term “utility inverter” means an inverter which—
Solar energy component
In general
The term “solar energy component” means any of the following:
Associated definitions
Photovoltaic cell
The term “photovoltaic cell” means the smallest semiconductor element of a solar module which performs the immediate conversion of light into electricity.
Photovoltaic wafer
The term “photovoltaic wafer” means a thin slice, sheet, or layer of semiconductor material of at least 240 square centimeters—
produced by a single manufacturer either—
Polymeric backsheet
The term “polymeric backsheet” means a sheet on the back of a solar module which acts as an electric insulator and protects the inner components of such module from the surrounding environment.
Solar grade polysilicon
The term “solar grade polysilicon” means silicon which is—
Solar module
The term “solar module” means the connection and lamination of photovoltaic cells into an environmentally protected final assembly which is—
Solar tracker
The term “solar tracker” means a mechanical system that moves solar modules according to the position of the sun and to increase energy output.
Solar tracker components
Torque tube
The term “torque tube” means a structural steel support element (including longitudinal purlins) which—
Structural fastener
The term “structural fastener” means a component which is used—
Wind energy component
In general
The term “wind energy component” means any of the following:
Associated definitions
Blade
The term “blade” means an airfoil-shaped blade which is responsible for converting wind energy to low-speed rotational energy.
Offshore wind foundation
The term “offshore wind foundation” means the component (including transition piece) which secures an offshore wind tower and any above-water turbine components to the seafloor using—
Nacelle
The term “nacelle” means the assembly of the drivetrain and other tower-top components of a wind turbine (with the exception of the blades and the hub) within their cover housing.
Related offshore wind vessel
The term “related offshore wind vessel” means any vessel which is purpose-built or retrofitted for purposes of the development, transport, installation, operation, or maintenance of offshore wind energy components.
Tower
The term “tower” means a tubular or lattice structure which supports the nacelle and rotor of a wind turbine.
Qualifying battery component
In general
The term “qualifying battery component” means any of the following:
Associated definitions
Electrode active material
The term “electrode active material” means cathode materials, anode materials, anode foils, and electrochemically active materials, including solvents, additives, and electrolyte salts that contribute to the electrochemical processes necessary for energy storage.
Battery cell
The term “battery cell” means an electrochemical cell—
Battery module
The term “battery module” means a module—
Applicable critical minerals
The term “applicable critical mineral” means any of the following:
Aluminum
Aluminum which is—
Antimony
Antimony which is—
Barite
Barite which is barium sulfate purified to a minimum purity of 80 percent barite by mass.
Beryllium
Beryllium which is—
Cerium
Cerium which is—
Cesium
Cesium which is—
Chromium
Chromium which is—
Cobalt
Cobalt which is—
Dysprosium
Dysprosium which is—
Europium
Europium which is—
Fluorspar
Fluorspar which is—
Gadolinium
Gadolinium which is—
Germanium
Germanium which is—
Graphite
Graphite which is purified to a minimum purity of 99.9 percent graphitic carbon by mass.
Indium
Indium which is—
converted to—
Lithium
Lithium which is—
Manganese
Manganese which is—
Metallurgical coal
Metallurgical coal which is suitable for use in the production of steel (within the meaning of the notice published by the Department of Energy entitled “Critical Material List; Addition of Metallurgical Coal Used for Steelmaking” (90 Fed. Reg. 22711 (May 29, 2025))), regardless of whether such production occurs inside or outside of the United States.
Neodymium
Neodymium which is—
Nickel
Nickel which is—
Niobium
Niobium which is—
Tellurium
Tellurium which is—
Tin
Tin which is purified to low alpha emitting tin which—
Tungsten
Tungsten which is converted to ammonium paratungstate or ferrotungsten.
Vanadium
Vanadium which is converted to ferrovanadium or vanadium pentoxide.
Yttrium
Yttrium which is—
Other minerals
Any of the following minerals, provided that such mineral is purified to a minimum purity of 99 percent by mass:
Special rules
In this section—
Related persons
Persons shall be treated as related to each other if such persons would be treated as a single employer under the regulations prescribed under section 52(b).
Only production in the United States taken into account
Sales shall be taken into account under this section only with respect to eligible components the production of which is within—
Pass-thru in the case of estates and trusts
Under regulations prescribed by the Secretary, rules similar to the rules of subsection (d) of section 52 shall apply.
3 Sale of integrated components
For purposes of this section, a person shall be treated as having sold an eligible component to an unrelated person if such component is integrated, incorporated, or assembled into another eligible component which is sold to an unrelated person.
3 Restrictions relating to prohibited foreign entities
In general
No credit shall be determined under subsection (a) for any taxable year if the taxpayer is—
Effective control
In the case of a taxpayer for which section 7701(a)(51)(D)(i)(II) is determined to apply for any taxable year, no credit shall be determined under subsection (a) for such taxable year if such determination relates to an eligible component described in subsection (c)(1).
(Added Pub. L. 117–169, title I, § 13502(a), Aug. 16, 2022, 136 Stat. 1971; amended Pub. L. 119–21, title VII, § 70514(a)–(e), July 4, 2025, 139 Stat. 273–275.)