U.S. Code · Título 33
Innovative technology
33 U.S.C. § 2314
Office of the Law Revision Counsel · release 119-142
Se muestra el texto operativo de la sección. Las notas estatutarias y el historial de enmiendas están en la fuente oficial.
Use
The Secretary shall, whenever feasible, seek to promote long- and short-term cost savings, increased efficiency, reliability, and safety, and improved environmental results through the use of innovative technology in all phases of water resources development projects and programs under the Secretary’s jurisdiction. To further this goal, Congress encourages the Secretary to—
Accelerated adoption of innovative technologies for management of contaminated sediments
Test projects
The Secretary shall approve an appropriate number of projects to test, under actual field conditions, innovative technologies for environmentally sound management of contaminated sediments.
Demonstration projects
The Secretary may approve an appropriate number of projects to demonstrate innovative technologies that have been pilot tested under paragraph (1).
Conduct of projects
Each pilot project under paragraph (1) and demonstration project under paragraph (2) shall be conducted by a university with proven expertise in the research and development of contaminated sediment treatment technologies and innovative applications using waste materials.
Location
At least 1 of the projects under this subsection shall be conducted in New England by the University of New Hampshire.
Reports
Within 2 years after November 17, 1988, and thereafter at the Secretary’s discretion, the Secretary shall provide Congress with a report on the results of, and recommendations to increase, the development and use of innovative technology in water resources development projects under the Secretary’s jurisdiction. Such report shall also contain information regarding innovative technologies which the Secretary has considered and rejected for use in water resources development projects under the Secretary’s jurisdiction.
“Innovative technology” defined
For the purpose of this section, the term “innovative technology” means designs, methods, or materials, including roller compacted concrete, geosynthetic materials, and advanced composites, that the Secretary determines are appropriate to carry out this section.
(Pub. L. 100–676, § 8, Nov. 17, 1988, 102 Stat. 4023; Pub. L. 106–53, title V, § 503(b), Aug. 17, 1999, 113 Stat. 337; Pub. L. 113–121, title III, § 3021, June 10, 2014, 128 Stat. 1301.)